Abstract

A nondestructive refractive-index profile measurement of optical-fiber preform rods by means of a transverse-differential-interference method is given. The error resulting from the data reading of a fringe center is investigated by computer simulation and is confirmed to be less than about 1% of the index difference between the core and the cladding. The refractive-index profile of a preform rod was measured, and it almost coincided with that of the fiber drawn from the rod. The elliptic deformation of the core and its variation along the longitudinal axis were measured.

© 1980 Optical Society of America

Accurate reconstruction of the refractive-index profile of fibers and preform rods from transverse interferometric data

Jacek Sochacki
Appl. Opt. 25(19) 3473-3482 (1986)

Nondestructive measurement of refractive-index profile and cross-sectional geometry of optical fiber preforms

C. Saekeang, P. L. Chu, and T. W. Whitbread
Appl. Opt. 19(12) 2025-2030 (1980)

Refractive-index profiling of preform rods by a photoelastic method: application to VAD single-mode fiber preforms

N. Shibata, Masao Kawachi, and Takao Edahiro
Appl. Opt. 21(19) 3507-3510 (1982)

Index profiling of distributed-index lenses by a shearing interference method

Y. Kokubun and K. Iga
Appl. Opt. 21(6) 1030-1034 (1982)

Determination of the refractive-index profile of light-focusing rods: accuracy of a method using Interphako interference microscopy

Yasuji Ohtsuka and Yasuhiro Koike
Appl. Opt. 19(16) 2866-2872 (1980)