Abstract

The energy absorbed by a solar energy tubular receiver element for a single incident ray is derived. Two types of receiver elements were analyzed: (1) an inner tube with an absorbing coating surrounded by a semi-transparent cover tube, and (2) a semitransparent inner tube filled with an absorbing fluid surrounded by a semitransparent cover tube. The formation of ray cascades in the semitransparent tubes is considered. A numerical simulation to investigate the influence of the angle of incidence, sizing, thickness, and coefficient of extinction of the tubes was performed. A comparison was made between receiver elements with and without cover tubes. Ray tracing analyses in which rays were followed within the tubular receiver element as well as throughout the rest of the collector were performed for parabolic and circular trough concentrating collectors.

© 1982 Optical Society of America

Contactless efficient two-stage solar concentrator for tubular absorber

Pablo Benítez, Rafael García, and Juan C. Miñano
Appl. Opt. 36(28) 7119-7124 (1997)

Nonimaging secondary concentrators for large rim angle parabolic troughs with tubular absorbers

Harald Ries and Wolfgang Spirkl
Appl. Opt. 35(13) 2242-2245 (1996)

Stationary concentrating reflector cum tracking absorber solar energy collector: optical design characteristics

W. G. Steward and F. Kreith
Appl. Opt. 14(7) 1509-1512 (1975)

Profiled absorber design illuminated uniformly by parabolic reflectors

Rabi Ibrahim Rabady, Mohamed Al-Fandi, Mohammad Khasawneh, Abeer Andrawes, and Yahia Makableh
Appl. Opt. 57(10) 2441-2445 (2018)

Theory and design of line-to-point focus solar concentrators with tracking secondary optics

Thomas Cooper, Gianluca Ambrosetti, Andrea Pedretti, and Aldo Steinfeld
Appl. Opt. 52(35) 8586-8616 (2013)