Abstract

A possible new way to drive hybrid optical devices based on a differential two-channel feedback configuration is presented. To verify the feasibility and characteristics of this approach, comparisons between two-channel and single-channel arrangements are reported. Several analogies and differences in operating conditions are also proved. From the point of view of application possibilities, the optical image obtained of an optical pulse exhibits time-discrimination characteristics, whereas in the single-channel case it shows discriminated intensity levels. This fact can be profitably used in parallel image processing systems.

© 1982 Optical Society of America

Optical stabilizer using a bistable optical device with a PMN electrostrictor

Manabu Gomi, Yuichi Miyazawa, Kenji Uchino, Masanori Abe, and Shoichiro Nomura
Appl. Opt. 21(14) 2616-2619 (1982)

Bistable magnetooptic switch for multimode optical fiber

M. Shirasaki, H. Takamatsu, and T. Obokata
Appl. Opt. 21(11) 1943-1949 (1982)

Characterization of laser-to-fiber coupling techniques by their optical feedback

W. Bludau and R. Rossberg
Appl. Opt. 21(11) 1933-1939 (1982)

Iterative image restoration by means of optical–digital hybrid system

K. Matsuoka, T. Shigematsu, Y. Ichioka, and T. Suzuki
Appl. Opt. 21(24) 4493-4499 (1982)

Two-dimensional Raman–Nath acousto-optic bistability by use of frequency feedback

Qida Zhao, Shiya He, B. J. Li, Pao-Lo Liu, and Xiaoyi Dong
Appl. Opt. 36(11) 2408-2413 (1997)