Abstract
Spatially resolved measurement of thermally induced surface displacements of printed wiring boards using phase-shifted holographic interferometry is discussed. Three separate holograms with three linearly independent illumination beams were recorded. The interferograms were viewed in real time from a fixed detector location, and phase maps corresponding to each illumination direction were generated with the phase-shifting interferometer. The phase maps are then used to compute the displacements on a point by point basis. The measurement accuracy is estimated to be ±0.004 μm out-of-plane and ±0.02 μm in-plane over a temperature range of 40°C. The system was tested on a through hole in a printed wiring board; the results of this test are discussed. Phase computation and unwrapping, data reduction, experimental geometry, surface preparation, and displacement computation are discussed.
© 1991 Optical Society of America
Full Article | PDF ArticleMore Like This
Pramod K. Rastogi, Marc Barillot, and Guillermo H. Kaufmann
Appl. Opt. 30(7) 722-728 (1991)
P. Hariharan, B. F. Oreb, and N. Brown
Appl. Opt. 22(6) 876-880 (1983)
C. M. Vest and D. W. Sweeney
Appl. Opt. 9(10) 2321-2325 (1970)