Abstract

The design of a two-mirror optical system for reshaping the irradiance distribution of a laser beam is presented. The second mirror is decentered relative to the first to eliminate the obscuration inherent in an axially symmetric design. A geometric-optics approach is used to derive a set of equations that describe the surface figures of each of the mirrors. (In general, the mirror surfaces are not rotationally symmetric.) The special case of a system to convert a Gaussian input beam into a uniform output distribution is considered. The expressions for the surface figures are evaluated numerically for several specific systems to provide illustrative examples. It is observed that in some cases rotationally symmetric aspheres may be used to construct the beam-shaping system.

© 1992 Optical Society of America

Optical design of freeform two-mirror beam-shaping systems

Vladimir Oliker
J. Opt. Soc. Am. A 24(12) 3741-3752 (2007)

On design of free-form refractive beam shapers, sensitivity to figure error, and convexity of lenses

Vladimir Oliker
J. Opt. Soc. Am. A 25(12) 3067-3076 (2008)

Reflective optics for irradiance redistribution of laser beams: design

Paul W. Scott and W. H. Southwell
Appl. Opt. 20(9) 1606-1610 (1981)

Refractive optical systems for irradiance redistribution of collimated radiation: their design and analysis

Patrick W. Rhodes and David L. Shealy
Appl. Opt. 19(20) 3545-3553 (1980)

Design of gradient-index lens systems for laser beam reshaping

Cheng Wang and David L. Shealy
Appl. Opt. 32(25) 4763-4769 (1993)