Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Predicted stresses and strains in fused biconical taper couplers subjected to tension

Not Accessible

Your library or personal account may give you access

Abstract

In fused biconical taper (FBT) couplers, the cores of the fibers are positioned close to each other. In order to bring the cores of the fibers in close proximity, the cladding in the fused midportion of the coupler has to be made thin. At the same time the coupler must be sufficiently strong, both on a short- and a long-time scale, and must be able to withstand appreciable axial deformations. These can be caused by the thermal contraction mismatch of the coupler with its substrate or can be due to a deliberate prestressing of the coupler structure in order to improve its dynamic stability. In this study an easy-to-apply analytical stress model is developed for the evaluation of stresses and strains in FBT couplers from the expected or measured total elongation. In the analysis the nonprismaticity of the coupler structure as well as the nonlinear behavior of the material was considered. The numerical example has been carried out for a coupler that is intended for undersea applications. The results obtained can be used in the stress–strain analyses and physical design of light-wave FBT couplers.

© 1993 Optical Society of America

Full Article  |  PDF Article
More Like This

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (2)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (12)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved