Abstract

This paper presents a new laser-based method of gas detection that permits real-time television images of gases to be produced. The principle of this technique [which is called backscatter absorption gas imaging (BAGI)] and the operation of two instruments used to implement it are described. These instruments use 5-W and 20-W CO₂ lasers to achieve gas imaging at ranges of approximately 30 and 125 m, respectively. Derivations of relevant BAGI signal equations that can be used to predict the performance of a gas imager are provided. The predictions of this model and the measured range performance of an extended-range gas imager are compared. Finally, the results of gas sensitivity measurements and imaging tests on flowing gases are presented. These can be used to generate a realistic estimate of the BAGI sensitivity expected in detecting leaks of many different vapors.

© 1993 Optical Society of America

Development of a pulsed backscatter-absorption gas-imaging system and its application to the visualization of natural gas leaks

Thomas J. Kulp, Peter Powers, Randall Kennedy, and Uta-Barbara Goers
Appl. Opt. 37(18) 3912-3922 (1998)

Demonstration of differential backscatter absorption gas imaging

Peter E. Powers, Thomas J. Kulp, and Randall Kennedy
Appl. Opt. 39(9) 1440-1448 (2000)

He–Ne and cw CO₂ laser long-path systems for gas detection

William B. Grant
Appl. Opt. 25(5) 709-719 (1986)

Development and testing of a synchronous-scanning underwater imaging system capable of rapid two-dimensional frame imaging

Thomas J. Kulp, Darrel Garvis, Randall Kennedy, Tom Salmon, and Keith Cooper
Appl. Opt. 32(19) 3520-3530 (1993)

CO₂ laser-based differential absorption lidar system for range-resolved and long-range detection of chemical vapor plumes

Clinton B. Carlisle, Jan E. van der Laan, Lewis W. Carr, Philippe Adam, and Jean-Pierre Chiaroni
Appl. Opt. 34(27) 6187-6200 (1995)