Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Ion-assisted sputter deposition of molybdenum-silicon multilayers

Not Accessible

Your library or personal account may give you access

Abstract

X-ray multilayer (ML) structures that are fabricated by the use of magnetron-sputter deposition exhibit a degradation in structural quality as the deposition pressure is increased. The observed change in morphology is attributed to a reduced mobility of surface adsorbed atoms, which inhibits the formation of smooth, continuous layers. The application of a negative substrate bias produces ion bombardment of the growing film surface by sputtering gas ions extracted from the plasma and permits direct control of the energy density supplied to the film surface during thin-film growth. The technique supplements the energy lost to thermalization in high-pressure deposition and permits the fabrication of high-quality ML structures at elevated processing pressures. A threefold improvement in the soft-x-ray normal-incidence reflectance at 130 A results for substrate bias voltages of the order of ~ −150 V for Mo–Si ML’s deposited at 10-mTorr Ar.

© 1993 Optical Society of America

Full Article  |  PDF Article
More Like This
Low-stress and high-reflectance Mo/Si multilayers for extreme ultraviolet lithography by magnetron sputtering deposition with bias assistance

Bo Yu, Chunshui Jin, Shun Yao, Chun Li, Yu Liu, Feng Zhou, Benyin Guo, Hui Wang, Yao Xie, and Liping Wang
Appl. Opt. 56(26) 7462-7468 (2017)

Effects of bombardment on optical properties during the deposition of silicon nitride by reactive ion-beam sputtering

M. F. Lambrinos, R. Valizadeh, and J. S. Colligon
Appl. Opt. 35(19) 3620-3626 (1996)

Ion-assisted deposition of optical thin films: low energy vs high energy bombardment

John R. McNeil, Alan C. Barron, S. R. Wilson, and W. C. Herrmann
Appl. Opt. 23(4) 552-559 (1984)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (4)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (2)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.