Abstract
We developed a far-infrared Fabry–Perot filter constructed from a single silicon substrate. The limiting resolving power caused by beam divergence of a silicon-gap Fabry–Perot filter is approximately 10 times higher than that of a vacuum-gap Fabry–Perot filter because of the large index of refraction of silicon. The filter thus permits compact, high-throughput optical systems. Metal mesh patterns microlithographed on each face provide enhanced, wavelength-dependent face reflectivity. We tested the performance of filters with metal mesh patterns consisting of inductive crosses and capacitive squares. A Fabry–Perot filter developed for a rocketborne astrophysics experiment with a capacitive square metal mesh pattern achieves a resolving power of λ/Δλfwhm = 160 at λ = 158 μm, with a peak transmittance of 37% over an active aperture of 6.9 mm for an f/3.8 optical beam at 15° incidence. The absorptivity of a 240-μm thick silicon substrate patterned with capacitive metal mesh is A ≲ 1% per pass, including loss in both the silicon and the metal mesh.
© 1995 Optical Society of America
Full Article | PDF ArticleMore Like This
K. F. Renk and L. Genzel
Appl. Opt. 1(5) 643-648 (1962)
G. R. Davis, I. Furniss, W. A. Towlson, P. A. R. Ade, R. J. Emery, W. M. Glencross, D. A. Naylor, T. J. Patrick, R. C. Sidey, and B. M. Swinyard
Appl. Opt. 34(1) 92-107 (1995)
D. B. Peterson and H. M. Pickett
Appl. Opt. 30(31) 4493-4495 (1991)