Abstract

The coupled power and the center wavelength of a wavelength-selective single-mode-fiber–thin-film coupler are accurately determined. The center wavelength depends on the fiber–film spacing. The required remaining cladding thickness of the fiber is accurately obtained from the loss-calibration curve of the half-coupler. The thickness of the film is controlled by spinning speed to match the propagation constants of the fiber and the film. Coupling fiber was used for efficient coupling. Experiments were also carried out for a wavelength filter, and the results almost agree with theoretical values. Shifting of the center wavelength with the condition of fire polishing of the half-coupler is shown.

© 1995 Optical Society of America

Linear control of the spectral characteristics of wavelength-selective components with a high-index tapered thin-film planar waveguide and a single-mode half-coupler

Alok K. Das and Anwar Hussain
Appl. Opt. 38(12) 2451-2457 (1999)

Precise control of the center wavelength and bandwidth of wavelength-selective single-mode fiber couplers

Alok K. Das and Mehabub A. Mondal
Opt. Lett. 19(11) 795-797 (1994)

Single-mode fiber–linearly tapered planar waveguide tunable coupler

Alok K. Das and Anwar Hussain
Appl. Opt. 36(27) 6822-6827 (1997)

Wavelength multiplexing in single-mode fiber couplers

Michel Digonnet and H. J. Shaw
Appl. Opt. 22(3) 484-491 (1983)

Spectral characteristics of asymmetric directional couplers in graded index channel waveguides analyzed by coupled-mode and normal-mode techniques

Martin N. Weiss and Ramakant Srivastava
Appl. Opt. 34(6) 1029-1040 (1995)