Abstract

Solgel alumina films were prepared by use of the Yoldas process and were characterized optically and microstructurally. From nitrogen adsorption and electron microscopy, we determined that the material was highly porous, with pores and crystallites of the order of tens of nanometers in size. The infrared transmission and reflectance of the films were measured, and dispersion curves were calculated as a function of firing temperature by extracting the film optical constants from the reflectance and thickness data. The use of this material in a hollow waveguide structure for the delivery of CO₂ laser radiation for surgical applications is discussed. Calculated waveguide losses indicate that solgel-based alumina is a good candidate material for this application.

© 1995 Optical Society of America

Hollow-waveguide delivery systems for high-power, industrial CO₂ lasers

Ricky K. Nubling and James A. Harrington
Appl. Opt. 35(3) 372-380 (1996)

Fabrication of copper oxide–coated hollow waveguides for CO₂ laser radiation

Yuji Matsuura, Daisuke Miura, and Mitsunobu Miyagi
Appl. Opt. 38(9) 1700-1703 (1999)

Optical properties of small-bore hollow glass waveguides

Yuji Matsuura, Todd Abel, and James. A. Harrington
Appl. Opt. 34(30) 6842-6847 (1995)

High-peak-power, pulsed CO₂ laser light delivery by hollow glass waveguides

Jiwang Dai and James A. Harrington
Appl. Opt. 36(21) 5072-5077 (1997)

Small-bore hollow waveguides for delivery of 3-μm laser radiation

Rebecca L. Kozodoy, Antonio T. Pagkalinawan, and James A. Harrington
Appl. Opt. 35(7) 1077-1082 (1996)