Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Signal processing and calibration of continuous-wave focused CO2 Doppler lidars for atmospheric backscatter measurement

Not Accessible

Your library or personal account may give you access

Abstract

Two continuous-wave (CW) focused CO2 Doppler lidars (9.1 and 10.6 μm) were developed for airborne in situ aerosol backscatter measurements. The complex path of reliably calibrating these systems, with different signal processors, for accurate derivation of atmospheric backscatter coefficients is documented. Lidar calibration for absolute backscatter measurement for both lidars is based on range response over the lidar sample volume, not solely at focus. Both lidars were calibrated with a new technique using well-characterized aerosols as radiometric standard targets and related to conventional hard-target calibration. A digital signal processor (DSP), a surface acoustic wave spectrum analyzer, and manually tuned spectrum analyzer signal analyzers were used. The DSP signals were analyzed with an innovative method of correcting for systematic noise fluctuation; the noise statistics exhibit the chi-square distribution predicted by theory. System parametric studies and detailed calibration improved the accuracy of conversion from the measured signal-to-noise ratio to absolute backscatter. The minimum backscatter sensitivity is ~3 × 10−12 m−1 sr−1 at 9.1 μm and ~9 × 10−12 m−1 sr−1 at 10.6 μm. Sample measurements are shown for a flight over the remote Pacific Ocean in 1990 as part of the NASA Global Backscatter Experiment (GLOBE) survey missions, the first time to our knowledge that 9.1–10.6-μm lidar intercomparisons were made. Measurements at 9.1 μm, a potential wavelength for space-based lidar remote-sensing applications, are to our knowledge the first based on the rare isotope 12C 18O2 gas.

© 1996 Optical Society of America

Full Article  |  PDF Article
More Like This
Airborne CO2 coherent lidar for measurements of atmospheric aerosol and cloud backscatter

Robert T. Menzies and David M. Tratt
Appl. Opt. 33(24) 5698-5711 (1994)

Lidar calibration technique using laboratory-generated aerosols

Maurice A. Jarzembski, Vandana Srivastava, and Diana M. Chambers
Appl. Opt. 35(12) 2096-2108 (1996)

Vertical variability of aerosol backscatter from an airborne-focused continuous-wave CO2 lidar at 9.1-µm wavelength

Maurice A. Jarzembski, Vandana Srivastava, and Jeffry Rothermel
Appl. Opt. 38(6) 908-915 (1999)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (4)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (3)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (13)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved