Abstract

We describe a sensitive and inexpensive vibrometer based on optical feedback by diffuse scattering to a single-mode diode laser. Fluctuations in the diode laser’s operating frequency that are due to scattered light from a vibrating surface are used to detect the amplitude and frequency of surface vibrations. An additional physical vibration of the laser provides an absolute amplitude calibration. The fundamental bandwidth is determined by the laser response time of roughly 10⁻⁹ s. A noise floor of 0.23 nm/Hz^1/2 at 30 kHz with 5 × 10⁻⁵ of the incident light returning is demonstrated. This instrument provides an inexpensive and sensitive method of noncontact measurement in solid materials with low or uneven reflectivity. It can be used as a vibration or velocity sensor.

© 1996 Optical Society of America

Single-mode diode laser with a large frequency-scanning range based on weak grating feedback

Shaozheng Jin, Yongqing Li, and Min Xiao
Appl. Opt. 35(9) 1436-1441 (1996)

Laser Doppler vibrometer employing active frequency feedback

Akobuije Chijioke and John Lawall
Appl. Opt. 47(27) 4952-4958 (2008)

Backscatter-modulated laser diode for low-frequency small-amplitude vibration measurement

T. Gharbi, A. Courteville, and A. Chebbour
Appl. Opt. 36(31) 8233-8237 (1997)

Laser-diode interferometric heterodyne vibrometer: application to linear motor control

Ahmed Chebbour, Tijani Gharbi, and Gilbert Tribillon
Appl. Opt. 40(31) 5610-5614 (2001)

Multipoint laser vibrometer for modal analysis

William N. MacPherson, Mark Reeves, David P. Towers, Andrew J. Moore, Julian D. C. Jones, Martin Dale, and Craig Edwards
Appl. Opt. 46(16) 3126-3132 (2007)