Abstract

Recently, polymeric multimode optical waveguides have been widely studied for low-cost interconnection use. We describe fabrication processes for a low-loss poly(methyl methacrylate) (less than 0.1 dB/cm at 675 nm) waveguide based on the reactive-ion-etching technique and for a slope (45° mirror face) formed on the waveguide. To obtain a ridge core with a crack-free and extremely smooth surface, we applied a heating process at a temperature greater than the glass transition point and a smoothening process by solvent. Furthermore, to fabricate simultaneously both vertical and sloped sidewalls, we applied a unique phenomenon in the process that decreases the etching rate directly under a narrow opening of etching mask. By using the above fabrication techniques, we demonstrated an out-of-plane branching mirror.

© 1997 Optical Society of America

Fabrication of large-core, high-Δ optical waveguides in polymers

Manabu Kagami, Hiroshi Ito, Tadashi Ichikawa, Satoru Kato, Morihiro Matsuda, and Nobuaki Takahashi
Appl. Opt. 34(6) 1041-1046 (1995)

Double V-groove ridge waveguides on a silicon substrate

Sanjay Goel, John C. Pincenti, and David L. Naylor
Appl. Opt. 32(3) 318-321 (1993)

Low-loss polymeric optical waveguides with large cores fabricated by hot embossing

H. Mizuno, O. Sugihara, T. Kaino, N. Okamoto, and M. Hosino
Opt. Lett. 28(23) 2378-2380 (2003)

Direct electron-beam irradiation: a new technique for the erasure of second-order nonlinearity and the fabrication of channel waveguides by use of optical polymeric films

Hideki Nakayama, Okihiro Sugihara, and Naomichi Okamoto
Opt. Lett. 22(20) 1541-1543 (1997)

Channel-optical-waveguide fabrication based on electron-beam irradiation of polyimides

Yasuko Yamada Maruo, Sigekuni Sasaki, and Toshiaki Tamamura
Appl. Opt. 34(6) 1047-1052 (1995)