Abstract
A new type of launching coupler for small-bore, hollow fibers, consisting of a lens and a tapered hollow waveguide, is proposed to increase the alignment tolerance between an input laser beam and small bore fibers. First, we designed the structural dimensions of the coupler by using a ray-tracing method. Then, a series of experiments employing tapered hollow waveguides made of Pyrex glass was performed to investigate the effectiveness of the new coupler. It is shown that the coupler has a high efficiency with attenuation of around 0.5 dB, especially when the inside of the taper section is coated with a polymer and silver film. In addition, we also show that the coupler has great tolerance for the transverse displacement of a waveguide axis, which gives a 0.1-dB loss increase for a 300-µm displacement.
© 1997 Optical Society of America
Full Article | PDF ArticleMore Like This
Yukio Abe, Yi-Wei Shi, Yuji Matsuura, and Mitsunobu Miyagi
Opt. Lett. 25(3) 150-152 (2000)
Rebecca L. Kozodoy, Antonio T. Pagkalinawan, and James A. Harrington
Appl. Opt. 35(7) 1077-1082 (1996)
Yuji Matsuura, Todd Abel, and James. A. Harrington
Appl. Opt. 34(30) 6842-6847 (1995)