Abstract

Ultrasmall light modulators have been made by sandwiching a polymer-dispersed liquid crystal (PDLC) between two ferrules with optical fibers. The device can modulate light independent of the state of polarization, because the PDLC becomes transparent or opaque when either sufficient or no voltage is applied to the film. The PDLC was prepared by mixing and annealing a prepolymer and nematic liquid crystal with large anisotropy. An optical fiber modulator with a 30-μm thick PDLC film had an extinction ratio of 8:1–33:1, an insertion loss of 1.3 dB, and rise and decay times of 4 ms at a wavelength of 1.3 μm.

© 1998 Optical Society of America

Polarization-independent distortion corrector fabricated using polymer-dispersed liquid crystals

Chia-Ting Hsieh, Pin-Ruei Ding, Chen-Hao Liao, Wei-Chia Su, Chi-Yen Huang, Chi-Huang Lin, Kuang-Yao Lo, Ching-Jui Tien, and Tzu-Fung Hsu
Appl. Opt. 53(3) 383-387 (2014)

Electrically controllable in-line-type polarizer using polymer-dispersed liquid-crystal spliced optical fibers

Seungin Baek, Yoonchan Jeong, Hak-Rin Kim, Sin-Doo Lee, and Byoungho Lee
Appl. Opt. 42(25) 5033-5039 (2003)

Experimental study on the performance of a variable optical attenuator using polymer dispersed liquid crystal

Ghada Nabil, Wing Fat Ho, and Hau Ping Chan
Appl. Opt. 52(22) E15-E21 (2013)

Gradient polymer-disposed liquid crystal single layer of large nematic droplets for modulation of laser light

Georgi B. Hadjichristov, Yordan G. Marinov, and Alexander G. Petrov
Appl. Opt. 50(16) 2326-2333 (2011)

Polarization properties of polymer-dispersed liquid-crystal film with small nematic droplets

Polina G. Lisinetskaya, Alexander A. Konkolovich, and Valery A. Loiko
Appl. Opt. 48(17) 3144-3153 (2009)