Abstract

The effect of various errors on the retrieval of optical depth, integrated backscatter, and extinction-to-backscatter ratio in optically thin clouds by use of a two-boundary algorithm is discussed. Uncertainties regarding aerosol loading at the cloud base and top lead to relevant errors that are often larger than those produced by signal noise. Formulas expressing the errors in the lidar-derived optical quantities dependent on optical depth and aerosol uncertainties at the base and top are derived for different fitting procedures. A method for the reduction of errors in the case of consecutive cloud measurements is explored, consisting of the fitting of the retrieved optical-depth-integrated backscatter data to obtain a correct extinction-to-backscatter ratio.

© 1998 Optical Society of America

Analysis of lidar backscatter profiles in optically thin clouds

Stuart A. Young
Appl. Opt. 34(30) 7019-7031 (1995)

Low and optically thin cloud measurements using a Raman-Mie lidar

Yonghua Wu, Shuki Chaw, Barry Gross, Fred Moshary, and Sam Ahmed
Appl. Opt. 48(6) 1218-1227 (2009)

Calibration of the 1064 nm lidar channel using water phase and cirrus clouds

Yonghua Wu, Chuen Meei Gan, Lina Cordero, Barry Gross, Fred Moshary, and Sam Ahmed
Appl. Opt. 50(21) 3987-3999 (2011)

Iterative method for the inversion of multiwavelength lidar signals to determine aerosol size distribution

K. Rajeev and K. Parameswaran
Appl. Opt. 37(21) 4690-4700 (1998)

Independent measurement of extinction and backscatter profiles in cirrus clouds by using a combined Raman elastic-backscatter lidar

Albert Ansmann, Ulla Wandinger, Maren Riebesell, Claus Weitkamp, and Walfried Michaelis
Appl. Opt. 31(33) 7113-7131 (1992)