Add to BibSonomyAbstract
High-average-power broadband 780-nm slab Ti:sapphire lasers, pumped by a kilohertz pulse repetition frequency copper vapor laser (CVL), were demonstrated. These lasers are designed for damage-free power scaling when pumped by CVL’s configured for maximum output power (of order 100 W) but with poor beam quality (M 2 ∼ 300). A simple Brewster-angled slab laser side pumped by a CVL produced 10-W average power (1.25-mJ pulses at 8 kHz) with 4.2-ns FWHM pulse duration at an absolute efficiency of 15% (68-W pump power). Thermal lensing in the Brewster slab laser resulted in multitransverse mode output, and pump absorption was limited to 72% by the maximum doping level for commercially available Ti:sapphire (0.25%). A slab laser with a multiply folded zigzag path was therefore designed and implemented that produced high-beam-quality (TEM00-mode) output when operated with cryogenic cooling and provided a longer absorption path for the pump. Excessive scattering of the Ti:sapphire beam at the crystal surfaces limited the efficiency of operation for the zigzag laser, but fluorescence diagnostic techniques, gain measurement, and modeling suggest that efficient power extraction (>15 W TEM00, >23% efficiency) from this laser would be possible for crystals with an optical quality surface polish.
© 1999 Optical Society of America
Full Article | PDF ArticleMore Like This
Q. Fu, F. Seier, S. K. Gayen, and R. R. Alfano
Opt. Lett. 22(10) 712-714 (1997)
H. Wang, S. Backus, Z. Chang, R. Wagner, K. Kim, X. Wang, D. Umstadter, T. Lei, M. Murnane, and H. Kapteyn
J. Opt. Soc. Am. B 16(10) 1790-1794 (1999)
Nikolai Zhavoronkov and Georg Korn
Opt. Lett. 29(2) 198-200 (2004)