Abstract
An important issue in developing applications for photopolymers in holography is the effect of film thickness on recording properties. Now it is possible to create these samples with a much wider range of thickness (d = 20–1400 µm) than was previously available. We exploit these recent advances in photopolymer processing to systematically evaluate how the dynamic range of a photopolymer depends on its thickness. The results illustrate that sample performance increases linearly with thickness as predicted by standard models of volume holography. However, above a critical thickness sample performance degrades, and the angular response of recorded plane-wave holograms shows evidence of grating curvature. These distortions are likely the result of photopolymer shrinkage, which in thicker samples occurs in a nonuniform fashion. This problem limits the performance of these photopolymers and is likely to be an issue for any photopolymer that undergoes comparable polymerization shrinkage.
© 2000 Optical Society of America
Full Article | PDF ArticleMore Like This
Mohammad Sultan Mahmud, Izabela Naydenova, Nitesh Pandey, Tzwetanka Babeva, Raghavendra Jallapuram, Suzanne Martin, and Vincent Toal
Appl. Opt. 48(14) 2642-2648 (2009)
Mohesh Moothanchery, Viswanath Bavigadda, Vincent Toal, and Izabela Naydenova
Appl. Opt. 52(35) 8519-8527 (2013)
S. Gallego, M. Ortuño, C. Neipp, A. Márquez, A. Beléndez, I. Pascual, J. V. Kelly, and J. T. Sheridan
Opt. Express 13(6) 1939-1947 (2005)