Abstract

Thin-film superconductive edge-transition bolometers are modeled with a one-dimensional analytic thermal model with joule heating, film and substrate materials, and the physical interface effects taken into consideration. The results from the model agree well with the experimental results of samples made of large-meander-line Yba₂Cu₃O_7-x films on crystalline SrTiO₃, LaAlO₃, and MgO substrates up to 100 kHz, the limits of the experimental setup. Compared with the results of the SrTiO₃ substrate samples, the results from the model of the LaAlO₃ and the MgO substrate samples deviate slightly from the measured values at very low modulation frequencies (below ∼10 Hz). The deviation increases for higher thermal-conductive substrate materials. When the model was used, the substrate absorption and the thermal parameters of the devices could also be investigated.

© 2001 Optical Society of America

Control of the responsivity and the detectivity of superconductive edge-transition YBa₂Cu₃O_7–x bolometers through substrate properties

Mehdi Fardmanesh, Kevin J. Scoles, and Allen Rothwarf
Appl. Opt. 38(22) 4735-4742 (1999)

Model for excess noise in voltage-biased superconducting bolometers

Jan M. Gildemeister, Adrian T. Lee, and Paul L. Richards
Appl. Opt. 40(34) 6229-6235 (2001)

Voltage-biased superconducting transition-edge bolometer with strong electrothermal feedback operated at 370 mK

Shih-Fu Lee, Jan M. Gildemeister, Warren Holmes, Adrian T. Lee, and Paul L. Richards
Appl. Opt. 37(16) 3391-3397 (1998)

Design and construction of high-sensitivity, infrared bolometers for operation at 300 mK

D. C. Alsop, C. Inman, A. E. Lange, and T. Wilbanks
Appl. Opt. 31(31) 6610-6615 (1992)

Silicon nitride micromesh bolometer array for submillimeter astrophysics

Anthony D. Turner, James J. Bock, Jeffrey W. Beeman, Jason Glenn, Peter C. Hargrave, Viktor V. Hristov, Hien T. Nguyen, Faiz Rahman, Srinivasan Sethuraman, and Adam L. Woodcraft
Appl. Opt. 40(28) 4921-4932 (2001)