Abstract
Computation of the readout signal of an optical disk involves Fourier transforms from the objective lens pupil to the disk and, after interaction with the disk, from the disk to the objective pupil. Traditionally, the complex two-dimensional Fourier transform is numerically evaluated as a two-dimensional fast Fourier transform. To obtain sufficient resolution in the involved planes, one must choose sampling grid sizes of typically 1024 × 1024 or higher, resulting in a substantial computation time if the calculation is to be repeated many times. Discussed is an alternative method for evaluating the Fourier transform, based on the chirp z transform, by which a considerable improvement in efficiency can be obtained without loss of accuracy.
© 2002 Optical Society of America
Full Article | PDF ArticleMore Like This
Seiji Kobayashi
Appl. Opt. 41(14) 2679-2685 (2002)
Philippe J. Marchand, Ashok V. Krishnamoorthy, Kristopher S. Urquhart, Pierre Ambs, Sadik C. Esener, and Sing H. Lee
Appl. Opt. 32(2) 190-203 (1993)
Rongguang Liang, James Carriere, and Masud Mansuripur
Appl. Opt. 41(8) 1565-1573 (2002)