Abstract
We have investigated a method for solving the inverse problem of determining the optical properties of a two-layer turbid model. The method is based on deducing the optical properties (OPs) of the top layer from the absolute spatially resolved reflectance that results from photon migration within only the top layer by use of a multivariate calibration model. Then the OPs of the bottom layer are deduced from relative frequency-domain (FD) reflectance measurements by use of the two-layer FD diffusion model. The method was validated with Monte Carlo FD reflectance profiles and experimental measurements of two-layer phantoms. The results showed that the method is useful for two-layer models with interface depths of >5 mm; the OPs were estimated, within a relatively short time (<1 min), with a mean error of <10% for the Monte Carlo reflectance profiles and with errors of <25% for the phantom measurements.
© 2003 Optical Society of America
Full Article | PDF ArticleMore Like This
George Alexandrakis, David R. Busch, Gregory W. Faris, and Michael S. Patterson
Appl. Opt. 40(22) 3810-3821 (2001)
Alwin Kienle, Michael S. Patterson, Nora Dögnitz, Roland Bays, Georges Wagnières, and Hubert van den Bergh
Appl. Opt. 37(4) 779-791 (1998)
Quan Liu and Nirmala Ramanujam
Appl. Opt. 45(19) 4776-4790 (2006)