Abstract

The response of a Class B laser to a rapid change in one of its parameters is known to be accompanied by delay and ringing. It has been theoretically and numerically shown that the transition can be modified by using adequate functional shapes for the control parameter (e.g., the laser pump) in order to steer the laser from one point of operation to another. Here we experimentally show the implementation of these ideas in a commercial device: a semiconductor laser. We establish a procedure for optimizing a controlled switch-on and switch-off and obtain a clean, fast, and reliable square pulse, either in a single shot or in a repetitive sequence. The generality of this procedure promises a wide field of application for a variety of laser systems.

© 2005 Optical Society of America

Optical design in beam steering environments with emphasis on laser transmission measurements

Laura A. Kranendonk and Scott T. Sanders
Appl. Opt. 44(31) 6762-6772 (2005)

Atmospheric compensation with a speckle beacon in strong scintillation conditions: directed energy and laser communication applications

Thomas Weyrauch and Mikhail A. Vorontsov
Appl. Opt. 44(30) 6388-6401 (2005)

High-contrast, all-optical switching in bacteriorhodopsin films

Ravinder Kumar Banyal and B. Raghavendra Prasad
Appl. Opt. 44(26) 5497-5503 (2005)

Compression of pulse duration in a laser-diode, end-pumped, double Q-switched laser

Kejian Yang, Shengzhi Zhao, Guiqiu Li, and Hongming Zhao
Appl. Opt. 44(2) 271-277 (2005)

Submicrosecond temperature measurement in liquid water with laser-induced thermal acoustics

David W. Alderfer, G. C. Herring, Paul M. Danehy, Toshiharu Mizukaki, and Kazuyoshi Takayama
Appl. Opt. 44(14) 2818-2826 (2005)