Abstract

Laser triangulation is used to measure the thickness of a liquid film in a test section consisting of a quartz viewing window, a water layer, and a hydrophobic membrane. The triangulation sensor acquires measurements to the bounding surfaces of the film while peering through multiple interfaces. This allows the difference between the two measurements to constitute the local film thickness. A refraction model is developed and applied to the analysis of data collected from the experiment. For verification, an empirical method is also developed and compared to the analytical approach. The measurement technique is intended to assess the stability of liquid films for use as gas–liquid contactors.

© 2006 Optical Society of America

Measurement of liquid-film thickness by laser interferometry

Wali M. Nozhat
Appl. Opt. 36(30) 7864-7869 (1997)

Laser-based diagnostics for the measurement of liquid water film thickness

Daniel Greszik, Huinan Yang, Thomas Dreier, and Christof Schulz
Appl. Opt. 50(4) A60-A67 (2011)

Laser triangulation: fundamental uncertainty in distance measurement

Rainer G. Dorsch, Gerd Häusler, and Jürgen M. Herrmann
Appl. Opt. 33(7) 1306-1314 (1994)

Flying spot laser triangulation scanner using lateral synchronization for surface profile precision measurement

Hanlin Zhang, Yongjie Ren, Changjie Liu, and Jigui Zhu
Appl. Opt. 53(20) 4405-4412 (2014)

Improved laser-based triangulation sensor with enhanced range and resolution through adaptive optics-based active beam control

Syed Azer Reza, Tariq Shamim Khwaja, Mohsin Ali Mazhar, Haris Khan Niazi, and Rahma Nawab
Appl. Opt. 56(21) 5996-6006 (2017)