Abstract
There are two goals in this simulation study: (1) to show that the time variation of the bioluminescence source can cause artifacts in the tomographic images such that quantification and localization becomes impossible; and (2) to show that the a priori knowledge of the light kinetics can be used to eliminate these artifacts. These goals are motivated by the fact that the half-life of luciferase has been reported as 30 min to 2 h in vivo. We perform two-dimensional simulations. We consider a diameter circular region with an inclusion of diameter located away from the center. The measurement data is simulated using a finite-element-based forward solver. We model the noncontact measurements such that four-wavelength data is collected from four 90° apart views. The results show that the ratio of the total imaging time to the half-life of the exponentially decaying bioluminescent source is the deciding factor in the reconstruction of the source. It is also demonstrated that a priori knowledge of the source kinetics is required to perform tomographic bioluminescence imaging of short half-life bioluminescent sources and the use of spatial a priori information alone is not adequate.
© 2008 Optical Society of America
Full Article | PDF ArticleMore Like This
Vadim Y. Soloviev
Appl. Opt. 46(14) 2778-2784 (2007)
John Virostko, Alvin C. Powers, and E. Duco Jansen
Appl. Opt. 46(13) 2540-2547 (2007)
Wenxiang Cong, Ge Wang, Durairaj Kumar, Yi Liu, Ming Jiang, Lihong V. Wang, Eric A. Hoffman, Geoffrey McLennan, Paul B. McCray, Joseph Zabner, and Alexander Cong
Opt. Express 13(18) 6756-6771 (2005)