An autostereoscopic display with parallax barrier attached onto a liquid crystal panel suffers from the trade-off between brightness and crosstalk. One approach for making improvement by modifying the layout of light blocking components, such as thin film transistor, storage capacitor, and protrusion, in the liquid crystal pixel has been proposed. Ray tracing simulation shows that the aperture of the slanted barrier can be significantly increased, hence increasing efficiency, while keeping the same crosstalk level if those light blocking components can be shifted to the corner of the pixel. A six-view 2.83 in. (7.19 cm) prototype has shown improvement on both brightness and crosstalk compared to its counterpart using a traditional liquid crystal panel, which demonstrates an effective approach for a high-efficiency barrier-type autostereoscopic 3D display with a liquid crystal panel.
© 2009 Optical Society of AmericaFull Article | PDF Article
More Like This
Jiang-Yong Luo, Qiong-Hua Wang, Wu-Xiang Zhao, and Da-Hai Li
Appl. Opt. 50(18) 2911-2915 (2011)
Guo-Jiao Lv, Bai-Chuan Zhao, Fei Wu, Wu-Xiang Zhao, Ya-Zhi Yang, and Qiong-Hua Wang
Appl. Opt. 56(10) 2792-2795 (2017)
Appl. Opt. 53(36) 8449-8455 (2014)