Abstract

Optical fiber sensors are a good alternative to piezoelectric devices in electromagnetic sensitive environments. In this study, we reported a fiber acoustic sensor based on single-mode fiber (SMF) tapers. The fiber taper is used as the sensing arm in a Mach–Zehnder interferometer. Benefiting from their micrometer dimensions, fiber tapers have shown higher sensitivities to the acoustic vibrations than SMFs. Under the same conditions, the thinnest fiber taper in this report, with a diameter of $1.7\mathrm{\mu m}$, shows a $20\mathrm{dB}$ improvement in the signal to noise ratio as compared to that of an SMF. This acoustic vibration sensor can detect the acoustic waves over the frequencies of $30\mathrm{Hz}–40\mathrm{kHz}$, which is limited by the acoustic wave generator in experiments. We also discussed the phase changes of fiber tapers with different diameters under acoustic vibrations.

© 2011 Optical Society of America

Refractive index sensing based on Mach–Zehnder interferometer formed by three cascaded single-mode fiber tapers

Di Wu, Tao Zhu, Ming Deng, De-Wen Duan, Lei-Lei Shi, Jun Yao, and Yun-Jiang Rao
Appl. Opt. 50(11) 1548-1553 (2011)

Fabrication and modeling of uniform-waist single-mode tapered optical fiber sensors

Joel Villatoro, David Monzón-Hernández, and Efrain Mejía
Appl. Opt. 42(13) 2278-2283 (2003)

Acoustic vibration sensor based on nonadiabatic tapered fibers

Ben Xu, Yi Li, Miao Sun, Zhen-Wei Zhang, Xin-Yong Dong, Zai-Xuan Zhang, and Shang-Zhong Jin
Opt. Lett. 37(22) 4768-4770 (2012)

High sensitivity of taper-based Mach–Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing

J. Yang, L. Jiang, S. Wang, B. Li, M. Wang, H. Xiao, Y. Lu, and H. Tsai
Appl. Opt. 50(28) 5503-5507 (2011)

Acoustic sensitivity predictions of single-mode optical fibers using Brillouin scattering

N. Lagakos, J. A. Bucaro, and R. Hughes
Appl. Opt. 19(21) 3668-3670 (1980)