Fluorine-doped tin oxide films grown by pulsed direct current magnetron sputtering with an Sn target

Bo-Huei Liao; Chien-Cheng Kuo; Pin-Jen Chen; Cheng-Chung Lee

doi:10.1364/AO.50.00C106

Applied Optics
Vol. 50,
Issue 9,
pp. C106-C110
(2011)
•https://doi.org/10.1364/AO.50.00C106

Fluorine-doped tin oxide films grown by pulsed direct current magnetron sputtering with an Sn target

Bo-Huei Liao, Chien-Cheng Kuo, Pin-Jen Chen, and Cheng-Chung Lee

Not Accessible

Your library or personal account may give you access

Get PDF
Email
Share
Get Citation
Copy Citation Text
Bo-Huei Liao, Chien-Cheng Kuo, Pin-Jen Chen, and Cheng-Chung Lee, "Fluorine-doped tin oxide films grown by pulsed direct current magnetron sputtering with an Sn target," Appl. Opt. 50, C106-C110 (2011)

Export Citation
- BibTex
- Endnote (RIS)
- HTML
- Plain Text
Citation alert
Save article

Related Topics
Optics & Photonics Topics
?

The topics in this list come from the Optics and Photonics Topics applied to this article.
Previously assigned OCIS codes
- Materials and process characterization (310.3840)
- Thin films, optical properties (310.6860)
- Thin films, other properties (310.6870)

About this Article
History
- Original Manuscript: July 30, 2010
- Revised Manuscript: October 15, 2010
- Manuscript Accepted: October 18, 2010
- Published: November 10, 2010

Abstract

Fluorine-doped tin oxide (FTO) films have been deposited by pulsed DC magnetron sputtering with an Sn target. Various ratios of ${CF}_{4} / O_{2}$ gas were injected to enhance the optical and electrical properties of the films. The extinction coefficient was lower than $1.5 \times 10^{- 3}$ in the range from 400 to $800 nm$ when the ${CF}_{4} / O_{2}$ ratio was 0.375. The resistivity of fluorine-doped ${SnO}_{2}$ films ( $1.63 \times 10^{- 3} Ω cm$ ) deposited at $300 ° C$ was 27.9 times smaller than that of undoped ${SnO}_{2}$ ( $4.55 \times 10^{- 2} Ω cm$ ). Finally, an FTO film was consecutively deposited for protecting the oxidation of indium tin oxide films. The resistivity of the double-layered film was $2.68 \times 10^{- 4} Ω cm$ , which increased by less than 39% at a $450 ° C$ annealing temperature for $1 h$ in air.

Full Article | PDF Article

More Like This

FTO films deposited in transition and oxide modes by magnetron sputtering using tin metal target

Bo-Huei Liao, Shih-Hao Chan, Cheng-Chung Lee, Chien-Cheng Kuo, Sheng-Hui Chen, and Donyau Chiang
Appl. Opt. 53(4) A148-A153 (2014)

Tri-band transparent conductive coating of indium tin oxide

Huafei Du, Mingyun Lv, Junhui Meng, and Weiyu Zhu
Appl. Opt. 55(34) D115-D119 (2016)

Low-refractive-index indium–tin–oxyfluoride thin films made by high-rate reactive dc magnetron sputtering

S.-J. Jiang, Z.-C. Jin, and Claes G. Granqvist
Appl. Opt. 27(14) 2847-2850 (1988)

Previous Article Next Article

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (11)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (2)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

${CF}_{4} / O_{2}$ Ratio	Deposition/Annealing Temperature ( $° C$ )	Sheet Resistivity ( $Ω / □$ )	Mobility ( ${cm}^{2} / V s$ )	Carrier Concentration ( ${cm}^{- 3}$ )	Average Transmittance ( $400 - 700 nm$ ) (%)	Resistivity ( $Ω cm$ )
0	300	1178	7.05	$1.95 \times 10^{19}$	76.83	$4.55 \times 10^{- 2}$
0.179	300	46.43	19	$2.02 \times 10^{20}$	80.00	$1.63 \times 10^{- 3}$
0.179	300/350 ( $1 h$ )	34.74	20.3	$2.50 \times 10^{20}$	80.48	$1.23 \times 10^{- 3}$
0.179	300/400 ( $1 h$ )	57.57	16.4	$2.09 \times 10^{20}$	78.41	$1.81 \times 10^{- 3}$

Film/Deposition Temperature	Power (W)	Ar Flow Rate (SCCM)^a	$O_{2}$ Flow Rate (SCCM)^a	${CF}_{4}$ Flow Rate (SCCM)^a	Average Transmittance (%)	Resistivity ( $Ω cm$ )
ITO ( $250 ° C$ )	600	72	2.7	0	83.25	$1.76 \times 10^{- 4}$
FTO ( $300 ° C$ )	100	52	19	3.5	80.48	$1.78 \times 10^{- 3}$

${CF}_{4} / O_{2}$ Ratio	Deposition/Annealing Temperature ( $° C$ )	Sheet Resistivity ( $Ω / □$ )	Mobility ( ${cm}^{2} / V s$ )	Carrier Concentration ( ${cm}^{- 3}$ )	Average Transmittance ( $400 - 700 nm$ ) (%)	Resistivity ( $Ω cm$ )
0	300	1178	7.05	$1.95 \times 10^{19}$	76.83	$4.55 \times 10^{- 2}$
0.179	300	46.43	19	$2.02 \times 10^{20}$	80.00	$1.63 \times 10^{- 3}$
0.179	300/350 ( $1 h$ )	34.74	20.3	$2.50 \times 10^{20}$	80.48	$1.23 \times 10^{- 3}$
0.179	300/400 ( $1 h$ )	57.57	16.4	$2.09 \times 10^{20}$	78.41	$1.81 \times 10^{- 3}$

Film/Deposition Temperature	Power (W)	Ar Flow Rate (SCCM)^a	$O_{2}$ Flow Rate (SCCM)^a	${CF}_{4}$ Flow Rate (SCCM)^a	Average Transmittance (%)	Resistivity ( $Ω cm$ )
ITO ( $250 ° C$ )	600	72	2.7	0	83.25	$1.76 \times 10^{- 4}$
FTO ( $300 ° C$ )	100	52	19	3.5	80.48	$1.78 \times 10^{- 3}$

Abstract

References

Cited By

Figures (11)

Tables (2)

Metrics

Applied Optics

Login or Create Account