Abstract

We demonstrate a method to make possible the mass production of corrugated long-period fiber gratings (C-LPFGs) by utilizing imprint lithography on polycarbonate (PC) substrates. For such C-LPFGs whose working principle is based on photoelastic effect, pretensile tension is required to be applied to inducing periodical refractive index variation. We then present an attempt to use PC as embedding material for providing internal compressive stress for C-LPFGs to have a photoelastic effect. This type of LPFG, termed embedded corrugated long-period fiber gratings (EC-LPFGs), is obtained after reimprinting the C-LPFGs into other PC substrates. Since compressive stress is retained due to the materials of different coefficients of thermal expansion (CTE), unlike C-LPFGs, EC-LPFGs can serve as strain, bending, and temperature sensors without the need of pretensile strain. The two most troublesome problems, the fragility of an etched fiber grating and the requirement of pretensile strain, can be simultaneously alleviated or solved by EC-LPFGs.

©2012 Optical Society of America

Transfer-matrix approach based on modal analysis for modeling corrugated long-period fiber gratings

Gia-Wei Chern, Lon A. Wang, and Chunn-Yenn Lin
Appl. Opt. 40(25) 4476-4486 (2001)

Residual-stress-induced helical long period fiber gratings for sensing applications

Ziliang Li, Shen Liu, Zhiyong Bai, Cailing Fu, Yan Zhang, Zhongyuan Sun, Xueya Liu, and Yiping Wang
Opt. Express 26(18) 24114-24123 (2018)

Wavelength shifts of cladding-mode resonance in corrugated long-period fiber gratings under torsion

Oleg V. Ivanov and Lon A. Wang
Appl. Opt. 42(13) 2264-2272 (2003)

Fabrication and characterization of sandwiched optical fibers with periodic gratings

Chia-Chin Chiang
Appl. Opt. 49(22) 4175-4181 (2010)

Residual-stress relaxation and densification in CO₂-laser-induced long-period fiber gratings

Michael R. Hutsel and Thomas K. Gaylord
Appl. Opt. 51(25) 6179-6187 (2012)