Abstract

Standoff detections of explosives using quantum cascade lasers (QCLs) and the photoacoustic (PA) technique were studied. In our experiment, a mid-infrared QCL with emission wavelength near 7.35 μm was used as a laser source. Direct standoff PA detection of trinitrotoluene (TNT) was achieved using an ultrasensitive microphone. The QCL output light was focused on explosive samples in powder form. PA signals were generated and detected directly by an ultrasensitive low-noise microphone with 1 in. diameter. A detection distance up to 8 in. was obtained using the microphone alone. With increasing detection distance, the measured PA signal not only decayed in amplitude but also presented phase delays, which clearly verified the source location. To further increase the detection distance, a parabolic sound reflector was used for effective sound collection. With the help of the sound reflector, standoff PA detection of TNT with distance of 8 ft was demonstrated.

© 2013 Optical Society of America

Quantum cascade laser based standoff photoacoustic chemical detection

Xing Chen, Liwei Cheng, Dingkai Guo, Yordan Kostov, and Fow-Sen Choa
Opt. Express 19(21) 20251-20257 (2011)

Use of photoacoustic excitation and laser vibrometry to remotely detect trace explosives

C. M. Wynn, R. W. Haupt, J. H. Doherty, R. R. Kunz, W. Bai, and G. Diebold
Appl. Opt. 55(32) 9054-9059 (2016)

Standoff detection of explosive substances at distances of up to 150 m

Anadi Mukherjee, Steven Von der Porten, and C. Kumar N. Patel
Appl. Opt. 49(11) 2072-2078 (2010)

Photo-vibrational spectroscopy of solid and liquid chemicals using laser Doppler vibrometer

Qi Hu, Jacob Song Kiat Lim, Huan Liu, and Yu Fu
Opt. Express 24(17) 19148-19156 (2016)

Ammonia detection by using quantum-cascade laser photoacoustic spectroscopy

Milton B. Filho, Marcelo G. da Silva, Marcelo S. Sthel, Delson U. Schramm, Helion Vargas, Andras Miklós, and Peter Hess
Appl. Opt. 45(20) 4966-4971 (2006)