Abstract

The ultra-long optical fiber of an optoelectronic oscillator (OEO) and the high spectral purity of its high frequency oscillation signal open the possibility of high-accuracy distance measurements at a long range. However, the longer the fiber length in an OEO, the more prone the system is to surrounding disturbance, which in turn leads to fluctuation of the loop delay and a reduction in distance measurement accuracy. In this paper, an intensity modulated light signal is combined with the light signal of an OEO in terms of wavelength division multiplexing (WDM) and is propagated through the fiber. The phase shift has been measured in real time to compensate for variations in fiber delay. With this method, experimental results showed a standard deviation of 14.8 μm.

© 2013 Optical Society of America

Full Article  |  PDF Article
More Like This
Improving the accuracy of distance measurements based on beat frequency detection of a dual-frequency optoelectronic oscillator

Bo Yang, Jiwen Yu, Hao Chi, Shuna Yang, Jun Ou, and Yanrong Zhai
Appl. Opt. 60(32) 10109-10113 (2021)

Long-range, high-precision, and high-speed absolute distance measurement based on alternately oscillating optoelectronic oscillators

Tianyuan Xie, Ju Wang, Zixiong Wang, Chuang Ma, Yang Yu, Jigui Zhu, and Jinlong Yu
Opt. Express 27(15) 21635-21645 (2019)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (5)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (5)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics