Abstract

We present a simple and robust approach to reduce laser speckle, which has limited the adoption of lasers in imaging and display applications. We use colloidal solutions that can quickly reduce speckle contrast due to the Brownian motion of the scattering particles. The high insertion loss associated with propagation through a colloidal solution was overcome by using white paint to cover the sides of the cuvette and an optical fiber to deliver the laser light deep into the colloidal solution, enabling transmission greater than 90%. The diffused laser output followed a Lambertian distribution and produced speckle contrast below 4% at an integration time of 129 μs. The ability for colloidal solutions to achieve fast speckle reduction without power consumption while maintaining high transmission, low cost, a compact size, and a long lifetime makes our approach useful for a wide range of laser imaging and projection applications.

© 2013 Optical Society of America

Laser speckle reduction via colloidal-dispersion-filled projection screens

Falko Riechert, Georg Bastian, and Uli Lemmer
Appl. Opt. 48(19) 3742-3749 (2009)

High speckle reduction rate in a laser projection system

Yue-Xun Song and Jui-Wen Pan
Appl. Opt. 60(34) 10564-10569 (2021)

Speckle reduction in laser imaging applications using rotating magneto-optical disk

Chien-Sheng Liu, Yu-Ching Chang, Kun-Wei Lin, and Po-Heng Lin
J. Opt. Soc. Am. A 31(1) 16-20 (2014)

Speckle reduction using an artificial neural network algorithm

Mohammad R. N. Avanaki, P. Philippe Laissue, Tae Joong Eom, Adrian G. Podoleanu, and Ali Hojjatoleslami
Appl. Opt. 52(21) 5050-5057 (2013)

Speckle suppression by doubly scattering systems

Dayan Li, Damien P. Kelly, and John T. Sheridan
Appl. Opt. 52(35) 8617-8626 (2013)