Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Mueller-matrix polarimeter using analysis of the nonlinear voltage–retardance relationship for liquid-crystal variable retarders

Not Accessible

Your library or personal account may give you access

Abstract

A method for using liquid-crystal variable retarders (LCVRs) with continually varying voltage to measure the complete Mueller matrix of a general sample is presented. The LCVRs are usually employed with fixed retardance values due to the nonlinear voltage–retardance behavior that they show. For the measurement method presented here, the nonlinear voltage–retardance relationship is first measured, and then a linear fit of the known retardance terms to the detected signal is performed. For a gap of air, the measurement error in the Mueller-matrix polarimeter is estimated at 1%–10%, depending on the Mueller-matrix element. Also, we present experimental results for a Glan–Thompson prism polarizer as a test sample, and we use the measured Mueller parameters as functions of the orientation of the optical axes of the polarizer as an indication of the quality of the polarimeter. In addition, results are compared to a typical step-voltage method to measure the Mueller matrix. Both methods give good results.

© 2014 Optical Society of America

Full Article  |  PDF Article
More Like This
Alignment and temperature effects in liquid-crystal-based active polarimetry

James C. Gladish and Donald D. Duncan
Appl. Opt. 53(18) 3982-3992 (2014)

Optimal design for a broadband Stokes polarimeter of liquid crystal variable retarders

Jiaxin Wu, Yanqiu Li, Tianlei Ning, Chenhui Long, and Guodong Zhou
Appl. Opt. 61(25) 7490-7497 (2022)

Calibration and data extraction in nonoptimized Mueller matrix polarimeters

Omar Rodríguez-Nuñez, Juan Manuel López-Téllez, Oscar G. Rodríguez-Herrera, and Neil C. Bruce
Appl. Opt. 56(15) 4398-4405 (2017)

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (4)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (16)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved