Abstract

Blind source separation (BSS) is implemented for optical fiber sensing systems, such as the fiber Bragg grating (FBG) sensing system and the single-mode-multimode-single-mode fiber (SMS) sensing system. The FastICA, a kind of multichannel BSS algorithm, is used to get the strain and the temperature with two FBGs. For the SMS sensing, a single-channel blind source separation (SCBSS) algorithm is employed to simultaneously measure the vibration and the temperature variation with only one SMS sensor. The errors of both the FBG and the SMS optical fiber sensing system are very small with the BSS algorithm. The implementation of BSS for the optical fiber sensing makes the multiparameter measurements more easily with low cost and high accuracy and can also be applied for signal de-noising field.

© 2014 Optical Society of America

Discrimination of optical sources by use of adaptive blind source separation theory

Ivica Kopriva and Antun Peršin
Appl. Opt. 38(7) 1115-1126 (1999)

Sub-Nyquist optical pulse sampling for photonic blind source separation

Taichu Shi, Yang Qi, Weipeng Zhang, Paul Prucnal, Jie Li, and Ben Wu
Opt. Express 30(11) 19300-19310 (2022)

Integrated hybrid Raman/fiber Bragg grating interrogation scheme for distributed temperature and point dynamic strain measurements

Farhan Zaidi, Tiziano Nannipieri, Marcelo A. Soto, Alessandro Signorini, Gabriele Bolognini, and Fabrizio Di Pasquale
Appl. Opt. 51(30) 7268-7275 (2012)

Multi-target reconstruction strategy based on blind source separation of surface measurement signals in FMT

Lizhi Zhang, Hongbo Guo, Jintao Li, Dizhen Kang, Diya Zhang, Xiaowei He, Yizhe Zhao, De Wei, and Jingjing Yu
Biomed. Opt. Express 14(3) 1159-1177 (2023)

Blind source separation of chaotic laser signals by independent component analysis

Masahiko Kuraya, Atsushi Uchida, Shigeru Yoshimori, and Ken Umeno
Opt. Express 16(2) 725-730 (2008)