Abstract

A method based on the common-path heterodyne interferometer system is proposed for the calibration of a Soleil–Babinet compensator. In this heterodyne interferometer system, which consists of two acousto-optic modulators, the compensator being calibrated is inserted into the signal path. By using the reference beam as the benchmark and a lock-in amplifier (SR844) as the phase retardation collector, retardations of 0 and $\lambda$ (one wavelength) can be located accurately, and an arbitrary retardation between 0 and $\lambda$ can also be measured accurately and continuously. By fitting a straight line to the experimental data, we obtained a linear correlation coefficient ($R$) of 0.995, which indicates that this system is capable of linear phase detection. The experimental results demonstrate determination accuracies of 0.212° and 0.26° and measurement precisions of 0.054° and 0.608° for retardations of 0 and $\lambda$, respectively.

© 2016 Optical Society of America

Application of phase-to-amplitude conversion technique to linear birefringence measurements

Hui-Kang Teng, Chien Chou, Chia-Nan Chang, and Hsieh-Ting Wu
Appl. Opt. 42(10) 1798-1804 (2003)

High precision retardation measurement using phase detection of Young’s fringes

Suezou Nakadate
Appl. Opt. 29(2) 242-246 (1990)

A Soleil Compensator for the Far Infrared

E. D. Palik
Appl. Opt. 4(8) 1017-1021 (1965)

Measuring the dynamics of circular dichroism in a pump-probe experiment with a Babinet-Soleil Compensator

Claire Niezborala and François Hache
J. Opt. Soc. Am. B 23(11) 2418-2424 (2006)

Simultaneous absolute measurements of principal angle and phase retardation with a new common-path heterodyne interferometer

Yu-Lung Lo, Chun-Hau Lai, Jing-Fung Lin, and Ping-Feng Hsu
Appl. Opt. 43(10) 2013-2022 (2004)