For a fiber-optic gyroscope (FOG) using electronic dithers to suppress the dead zone, without a fixed loop gain, the deterministic compensation for the dither signals in the control loop of the FOG cannot remain accurate, resulting in the dither residuals in the FOG rotation rate output and the navigation errors in the inertial navigation system. An all-digital automatic-gain-control method for stabilizing the loop gain of the FOG is proposed. By using a perturbation square wave to measure the loop gain of the FOG and adding an automatic gain control loop in the conventional control loop of the FOG, we successfully obtain the actual loop gain and make the loop gain converge to the reference value. The experimental results show that in the case of 20% variation in the loop gain, the dither residuals are successfully eliminated and the standard deviation of the FOG sampling outputs is decreased from to (sampling period 2.5 ms, 10 points smoothing). With this method, the loop gain of the FOG can be stabilized over the operation temperature range and in the long-time application, which provides a solid foundation for the engineering applications of the high-precision FOG.
© 2016 Optical Society of AmericaFull Article | PDF Article
More Like This
Kyoung-Ho Chong, Woo-Seok Choi, and Kil-To Chong
Appl. Opt. 55(1) 165-170 (2016)
Appl. Opt. 50(25) E152-E161 (2011)
Lu Liu, Junyu Tu, Sen Ye, and Huilian Ma
Appl. Opt. 59(35) 11013-11018 (2020)