Abstract
Nano scratch for optical glass BK7 based on the ductile-removal regime was carried out, and the influence rule of scratch parameters on surface deformation and friction characteristic was analyzed. Experimental results showed that, with increase of normal force, the deformation of burrs in the edge of the scratch was more obvious, and with increase of the scratch velocity, the deformation of micro-fracture and burrs in the edge of the scratch was more obvious similarly. The residual depth of the scratch was measured by atomic force microscope. The experimental results also showed that, with increase of normal force, the residual depth of the scratch increased linearly while the elastic recovery rate decreased. Furthermore, with increase of scratch velocity, the residual depth of the scratch decreased while the elastic recovery rate increased. The scratch process of the Berkovich indenter was divided into the cutting process of many large negative rake faces based on the improved cutting model, and the friction characteristic of the Berkovich indenter and the workpiece was analyzed. The analysis showed that the coefficient of friction increased and then tended to be stable with the increase of normal force. Meanwhile, the coefficient of friction decreased with the increase of scratch velocity, and the coefficients, and , were introduced to improve the original formula of friction coefficient.
© 2016 Optical Society of America
Full Article | PDF ArticleMore Like This
Guoyan Sun, Lingling Zhao, Qingliang Zhao, and Limin Gao
Appl. Opt. 57(14) 3704-3713 (2018)
Chen Li, Feihu Zhang, Xin Wang, and Xiaoshuang Rao
Appl. Opt. 57(14) 3661-3668 (2018)
Zhichao Dong and Haobo Cheng
Appl. Opt. 56(26) 7404-7412 (2017)