Abstract

Self-mixing based on vertical-cavity surface-emitting lasers (VCSELs) offers a compact and low-cost coherent detection scheme for interferometric accessible measurements. The direct detection of the change in the junction voltage, in contrast to the traditional optical detection method by means of an external photodiode, further simplifies the setup by adding detector-less capability. The linewidth of an NIR VCSEL was estimated by using the method based on the statistical analysis of the laser self-mixing fringe period in the moderate feedback regime. We investigate the junction voltage noise and optical power noise, simultaneously acquired, in order to establish the best operational condition for both detection schemes. When comparing the laser linewidth measured by the traditional optical power modulation with that of the detector-less voltage self-mixing signal, the agreement is within the experimental errors.

© 2016 Optical Society of America

Equivalent wavelength self-mixing interferometry for displacement measurement

Zhen Huang, Chengwei Li, Songquan Li, and Dongyu Li
Appl. Opt. 55(25) 7120-7125 (2016)

Self-mixing imaging sensor using a monolithic VCSEL array with parallel readout

Yah Leng Lim, Milan Nikolic, Karl Bertling, Russell Kliese, and Aleksandar D. Rakić
Opt. Express 17(7) 5517-5525 (2009)

Self-mixing flow sensor using a monolithic VCSEL array with parallel readout

Yah Leng Lim, Russell Kliese, Karl Bertling, Katsuyoshi Tanimizu, P. A. Jacobs, and Aleksandar D. Rakić
Opt. Express 18(11) 11720-11727 (2010)

Self-mixing interferometry for rotational speed measurement of servo drives

Hui Sun, Ji-Gou Liu, Quan Zhang, and Ralph Kennel
Appl. Opt. 55(2) 236-241 (2016)

Simultaneous measurement of vibration and parameters of a semiconductor laser using self-mixing interferometry

Yan Gao, Yanguang Yu, Jiangtao Xi, and Qinghua Guo
Appl. Opt. 53(19) 4256-4263 (2014)