Abstract

We propose a low-power variable optical attenuator based on the configuration of a hybrid silicon oxynitride (SiON)-polymer S-bend waveguide and two grooves in both sides of the S-bend waveguide core. With such a configuration, the opposite thermo-optic characteristics of SiON and polymer materials can be fully utilized. As a consequence, the heat utilization efficiency is increased. Theoretical simulation shows that an optical attenuation of $\sim 50\mathrm{dB}$ can be achieved with an applied electrical power of 3.6 mW. A typical fabricated device, which has a total length of 8 mm, shows a maximum optical attenuation of 46 dB with an applied electrical power of 16.2 mW and an insertion loss of 5.4 dB.

© 2016 Optical Society of America

Low-power total internal reflection thermo-optic switch based on hybrid SiON-polymer X-junction waveguides

Qian Qian Song, Kai Xin Chen, Ling Fang Wang, Jia Qi Guo, Shuo Chen, and Tian Xiang Zheng
Appl. Opt. 57(33) 9809-9813 (2018)

Planar waveguide-based silica–polymer hybrid variable optical attenuator and its associated polymers

Zhiyi Zhang, Gao Zhi Xiao, Ping Zhao, and Chander P. Grover
Appl. Opt. 44(12) 2402-2408 (2005)

Variable optical attenuator using thermo-optic two-mode interference device with fast response time

Partha P. Sahu
Appl. Opt. 48(21) 4213-4218 (2009)

Low consumption power variable optical attenuator with sol-gel derived organic/inorganic hybrid materials

Dongxiao Li, Yanwu Zhang, Liying Liu, and Lei Xu
Opt. Express 14(13) 6029-6034 (2006)

Thermally optimized variable optical attenuators on a polymer platform

Alejandro Maese-Novo, Ziyang Zhang, Gelani Irmscher, Andrzej Polatynski, Tim Mueller, David de Felipe, Moritz Kleinert, Walter Brinker, Crispin Zawadzki, and Norbert Keil
Appl. Opt. 54(3) 569-575 (2015)