A full-duplex radio-over-fiber system is proposed, which provides both the generation of a millimeter-wave (mm-wave) signal with tunable frequency multiplication factors (FMFs) and wavelength reuse for uplink data. A dual-driving Mach–Zehnder modulator and a phase modulator are cascaded to form an optical frequency comb. An acousto-optic tunable filter based on a uniform fiber Bragg grating (FBG-AOTF) is employed to select three target optical sidebands. Two symmetrical sidebands are chosen to generate mm waves with tunable FMFs up to 16, which can be adjusted by changing the frequency of the applied acoustic wave. The optical carrier is reused at the base station for uplink connection. FBG-AOTFs driven by two acoustic wave signals are experimentally fabricated and further applied in the proposed scheme. Results of the research indicate that the 2-Gbit/s data can be successfully transmitted over a 25-km single-mode fiber for bidirectional full-duplex channels with power penalty of less than 2.6 dB. The feasibility of the proposed scheme is verified by detailed simulations and partial experiments.
© 2017 Optical Society of AmericaFull Article | PDF Article
More Like This
Lin Chen, Xiaoyan Lei, Shuangchun Wen, and Jianguo Yu
Opt. Express 15(9) 5893-5897 (2007)
Jianxin Ma, Yu Zhan, Min Zhou, Hao Liang, Yufeng Shao, and Chongxiu Yu
J. Opt. Commun. Netw. 4(7) 557-564 (2012)
J. Opt. Commun. Netw. 3(2) 127-133 (2011)