Abstract

Frequency-modulated continuous-wave lidar is evaluated for range finding, velocimetry, and laser anemometry. An original signal processing and waveform calibration for range finding leads to a reduction of computational effort while preserving capability for long-range measurement. Multiple target distance measurement is also demonstrated. For laser anemometry, the aim is to avoid parasitic echoes in the vicinity of a helicopter and to measure the air speed at the shortest distance farther than the rotor-induced turbulent volume around the helicopter. Flight tests of this functionality and vortex ring state warning are demonstrated.

© 2017 Optical Society of America

Frequency-modulated multifunction lidar for anemometry, range finding, and velocimetry–1. Theory and signal processing

P. Feneyrou, L. Leviandier, J. Minet, G. Pillet, A. Martin, D. Dolfi, J.-P. Schlotterbeck, P. Rondeau, X. Lacondemine, A. Rieu, and T. Midavaine
Appl. Opt. 56(35) 9663-9675 (2017)

Wind ranging and velocimetry with low peak power and long-duration modulated laser

Eiichi Yoshikawa and Tomoo Ushio
Opt. Express 25(8) 8845-8859 (2017)

Ranging and velocimetry measurements by phase-based MTCW lidar

Mustafa Mert Bayer and Ozdal Boyraz
Opt. Express 29(9) 13552-13562 (2021)

Simultaneous ranging and velocimetry with multi-tone continuous wave lidar

Mustafa Mert Bayer, Rasul Torun, Xun Li, Jose E. Velazco, and Ozdal Boyraz
Opt. Express 28(12) 17241-17252 (2020)

Coherent lidar airborne wind sensor II: flight-test results at 2 and 10 μm

Russell Targ, Bruce C. Steakley, James G. Hawley, Lawrence L. Ames, Paul Forney, David Swanson, Richard Stone, Robert G. Otto, Vassilis Zarifis, Philip Brockman, Raymond S. Calloway, Sarah Harrell Klein, and Paul A. Robinson
Appl. Opt. 35(36) 7117-7127 (1996)