Abstract

A semiempirical equation is derived that allows estimating the electronic contribution to the nonlinear refractive index of an optical material from knowledge of the linear one. The approach is restricted to practically loss-free media at low frequencies. In contrast to other approaches, no explicit data on the optical gap or Abbe number are required. A comparison with experimental data from typical oxide and fluoride materials reveals an excellent agreement between experiment and theoretical estimation.

© 2016 Optical Society of America

Optical parameters of oxide films typically used in optical coating production

Alexander V. Tikhonravov, Michael K. Trubetskov, Tatiana V. Amotchkina, Gary DeBell, Vladimir Pervak, Anna Krasilnikova Sytchkova, Maria Luisa Grilli, and Detlev Ristau
Appl. Opt. 50(9) C75-C85 (2011)

Refractive index of some oxide and fluoride coating materials

David Smith and Philip Baumeister
Appl. Opt. 18(1) 111-115 (1979)

Resonant-type third-order optical nonlinearity and optical bandgap in multicomponent oxide glasses

Fouad El-Diasty, Manal Abdel-Baki, and Assem M. Bakry
Appl. Opt. 48(13) 2444-2449 (2009)

Simultaneous interferometric measurement of linear coefficient of thermal expansion and temperature-dependent refractive index coefficient of optical materials

James A. Corsetti, William E. Green, Jonathan D. Ellis, Greg R. Schmidt, and Duncan T. Moore
Appl. Opt. 55(29) 8145-8152 (2016)

Bare and thin-film-coated substrates with null reflection for p- and s-polarized light at the same angle of incidence: reflectance and ellipsometric parameters as functions of substrate refractive index and film thickness

R. M. A. Azzam
Appl. Opt. 55(30) 8464-8467 (2016)