Abstract

We propose a plastic optical fiber (POF) with a multi-notched structure as a long-period grating for refractive index (RI) sensing. A new approach to modify the structure of POFs with enhanced RI sensitivity was carried out. The multi-notched structure was made on the surface of the fiber by pressing a thread rod against the POF. The RI sensing performances for straight and macro-bending (U-shaped) POFs with this structure were studied. It is found that the POF probes with straight multi-notched structures were not sensitive enough for RI measurements. After bending the multi-notched structure into U-shaped probes, the RI sensing performance was improved markedly. By altering the structural parameters, the RI sensing performance of the U-shaped POF probes with multi-notched structures were optimized, and the highest sensitivity of 1130%/RIU with a resolution of $8.44\times {10}^{-4}\mathrm{RIU}$ in the RI range of 1.333–1.410 was obtained. In addition, the characteristic of the temperature dependence of the sensor was presented. The probe is a low-cost solution for RI sensing purpose, which has the features of simple structure, easy fabrication, compact size, and intensity modulation at visible wavelengths.

© 2017 Optical Society of America

Investigation of a macrobending micro-plastic optical fiber for refractive index sensing

Ning Jing, Jie Zheng, Xiaowei Zhao, and Chuanxin Teng
Appl. Opt. 53(34) 8145-8150 (2014)

Temperature dependence of a refractive index sensor based on a macrobending micro-plastic optical fiber

Ning Jing, Chuanxin Teng, Xiaowei Zhao, and Jie Zheng
Appl. Opt. 54(8) 1890-1893 (2015)

Cascaded plastic optical fiber based SPR sensor for simultaneous measurement of refractive index and temperature

Chuanxin Teng, Xinjing Li, Ming Chen, Shijie Deng, Hongchang Deng, Minmin Xue, Libo Yuan, Rui Min, Xiaosong Fu, and Xuehao Hu
Biomed. Opt. Express 15(2) 793-801 (2024)

Refractive index sensor based on plastic optical fiber with tapered structure

Feng De-Jun, Liu Guan-Xiu, Liu Xi-Lu, Jiang Ming-Shun, and Sui Qing-Mei
Appl. Opt. 53(10) 2007-2011 (2014)

Wet etching technique for fabrication of a high-quality plastic optical fiber sensor

Mingfu Zhao, Lang Dai, Nianbing Zhong, Zhengkun Wang, Ming Chen, Bingxin Li, Binbin Luo, Bin Tang, Shenghui Shi, Tao Song, and Xue Zou
Appl. Opt. 56(31) 8845-8850 (2017)