Displays capable of true holographic video have been prohibitively expensive and difficult to build. With this paper, we present a suite of modularized hardware components and software tools needed to build a Holovideo Monitor with basic “hacker-space” equipment, highlighting improvements that have enabled the total materials cost to fall to $820, well below that of other holographic displays. It is our hope that the current level of simplicity, development, design flexibility, and documentation will enable the lay engineer, programmer, and scientist to relatively easily replicate, modify, and build upon our designs, bringing true holographic video to the masses.
© 2017 Optical Society of AmericaFull Article | PDF Article
CorrectionsAndrew Henrie, Jesse R. Codling, Scott Gneiting, Justin B. Christensen, Parker Awerkamp, Mark J. Burdette, and Daniel E. Smalley, "Hardware and software improvements to a low-cost horizontal parallax holographic video monitor: publisher’s note," Appl. Opt. 57, 8528-8528 (2018)
10 September 2018: Corrections were made to the body.
More Like This
Andrew Henrie, Jesse R. Codling, Scott Gneiting, Justin B. Christensen, Parker Awerkamp, Mark J. Burdette, and Daniel E. Smalley
Appl. Opt. 57(29) 8528-8528 (2018)
R. Häussler, Y. Gritsai, E. Zschau, R. Missbach, H. Sahm, M. Stock, and H. Stolle
Appl. Opt. 56(13) F45-F52 (2017)
You Seok Kim, Taegeun Kim, Ting-Chung Poon, and Jin Tae Kim
Appl. Opt. 50(7) B81-B87 (2011)