Abstract

In this paper, we propose a simple, fast, and accurate technique for detection of collimation position of an optical beam using the self-imaging phenomenon and correlation analysis. Herrera-Fernandez et al. [J. Opt. 18, 075608 (2016) [CrossRef]  ] proposed an experimental arrangement for collimation testing by comparing the period of two different self-images produced by a single diffraction grating. Following their approach, we propose a testing procedure based on correlation coefficient (CC) for efficient detection of variation in the size and fringe width of the Talbot self-images and thereby the collimation position. When the beam is collimated, the physical properties of the self-images of the grating, such as its size and fringe width, do not vary from one Talbot plane to the other and are identical; the CC is maximum in such a situation. For the de-collimated position, the size and fringe width of the self-images vary, and correspondingly the CC decreases. Hence, the magnitude of CC is a measure of degree of collimation. Using the method, we could set the collimation position to a resolution of 1 μm, which relates to $\pm 0.25\mathrm{\mu }\mathrm{radians}$ in terms of collimation angle (for testing a collimating lens of diameter 46 mm and focal length 300 mm). In contrast to most collimation techniques reported to date, the proposed technique does not require a translation/rotation of the grating, use of complicated phase evaluation algorithms, or an intricate method for determination of period of the grating or its self-images. The technique is fully automated and provides high resolution and precision.

© 2018 Optical Society of America

MSE-based analysis of circular grating self-images for testing beam collimation

Shivangi Bande, Vimal Bhatia, and Shashi Prakash
Appl. Opt. 59(24) 7160-7168 (2020)

Automated collimation testing using a temporal phase shifting technique in Talbot interferometry

Shashi Prakash, Santosh Rana, Satya Prakash, and Osami Sasaki
Appl. Opt. 47(31) 5938-5943 (2008)

Automated collimation testing by incorporating the Fourier transform method in Talbot interferometry

Jitendra Dhanotia and Shashi Prakash
Appl. Opt. 50(10) 1446-1452 (2011)

Comparison of sensitivity to beam collimation of the holographic shearing interferometer with the wedge plate shearing interferometer and the Talbot shearing interferometer

Rajiv Dubey and Raj Kumar
J. Opt. Soc. Am. A 37(9) B36-B45 (2020)

Collimation testing using deflectometry in conjunction with windowed Fourier transform analysis

Jitendra Dhanotia, Vimal Bhatia, and Shashi Prakash
Appl. Opt. 56(8) 2346-2352 (2017)