Abstract

A photonic crystal fiber Mach–Zehnder interferometer design was optimized to obtain high performance and ultralow chirp. Two long-period gratings were used to excite the cladding modes, and the rich structure of the cladding was tailored to obtain a slightly chirped free spectral range, as required by the Telecommunication Standardization Sector of the International Telecommunication Union (ITU-T) Norm G.694.1. Finally, a fabrication tolerance analysis was performed. The advantages of the proposed device are an ultralow chirp, high bandwidth, and fabrication robustness tolerance.

© 2018 Optical Society of America

Photonic crystal fiber based Mach-Zehnder interferometer for DPSK signal demodulation

Jiangbing Du, Yongheng Dai, Gordon K. P. Lei, Weijun Tong, and Chester Shu
Opt. Express 18(8) 7917-7922 (2010)

All-fiber Mach-Zehnder type interferometers formed in photonic crystal fiber

Hae Young Choi, Myoung Jin Kim, and Byeong Ha Lee
Opt. Express 15(9) 5711-5720 (2007)

Mach–Zehnder interferometric magnetic field sensor based on a photonic crystal fiber and magnetic fluid

Xiang Zi Ding, Hang-Zhou Yang, Xue-Guang Qiao, Pan Zhang, Oin Tian, Qiang Zhou Rong, Nurul Asha Mohd Nazal, Kok-Sing Lim, and Harith Ahmad
Appl. Opt. 57(9) 2050-2056 (2018)

Mach–Zehnder interferometer formed in a photonic crystal fiber based on a pair of long-period fiber gratings

Jong H. Lim, Hyun S. Jang, Kyung S. Lee, Jin C. Kim, and Byeong H. Lee
Opt. Lett. 29(4) 346-348 (2004)

All-fiber Mach-Zehnder interferometer based on two liquid infiltrations in a photonic crystal fiber

Jia-hong Liou and Chin-ping Yu
Opt. Express 23(5) 6946-6951 (2015)