Abstract

This paper presents a new development of small-diameter, high-spatial-resolution, semipassive bimorph deformable mirrors to be used in different imaging systems. To manufacture the small control elements, laser engraving technology is used. An ultrasonic welding technique to connect the wires to the electrodes (actuators) is applied for this kind of mirror. The initial flatness of the mirror surface equals 0.33 μm (P-V) due to the use of substrate polishing technology after gluing the glass substrate to a piezo disk. We present the main parameters of these wavefront correctors, such as the response functions of different electrodes, temporal behavior, and the ability to compensate for high-order aberrations.

© 2019 Optical Society of America

Actuator patterns for unimorph and bimorph deformable mirrors

Sven Verpoort and Ulrich Wittrock
Appl. Opt. 49(31) G37-G46 (2010)

High-spatial resolution stacked-actuator deformable mirror for correction of atmospheric wavefront aberrations

Vadim Samarkin, Julia Sheldakova, Vladimir Toporovsky, Alexey Rukosuev, and Alexis Kudryashov
Appl. Opt. 60(23) 6719-6724 (2021)

Decoupling algorithm of a double-layer bimorph deformable mirror: analysis and experimental test

Yu Ning, Bo Chen, Hao Yu, Hong Zhou, Huafeng Yang, Chunlin Guan, Changhui Rao, and Wenhan Jiang
Appl. Opt. 48(17) 3154-3159 (2009)

Correction of ocular and atmospheric wavefronts: a comparison of the performance of various deformable mirrors

Nicholas Devaney, Eugenie Dalimier, Thomas Farrell, Derek Coburn, Ruth Mackey, David Mackey, Francois Laurent, Elizabeth Daly, and Chris Dainty
Appl. Opt. 47(35) 6550-6562 (2008)

Extremely high-power CO₂ laser beam correction

Alexis Kudryashov, Alexander Alexandrov, Alexey Rukosuev, Vadim Samarkin, Pierre Galarneau, Simon Turbide, and François Châteauneuf
Appl. Opt. 54(14) 4352-4358 (2015)