Abstract

A focus error method photothermal microscope was designed for the characterization of absorptance homogeneity in thin-film coatings for high-power lasers. The technique relies on the detection of the thermal lens induced by the local absorption of a light power focused laser. The detailed design of the instrument is presented. The resolution of the system is better than 0.1 ppm and allows the realization of spatial sweeps and even measurements of the evolution of absorption as a function of time with a spatial resolution of 1 μm. These capabilities allow the location of defects and their characterization.

© 2019 Optical Society of America

Investigation of laser annealing mechanisms in thin film coatings by photothermal microscopy

Facundo Zaldivar Escola, Nélida Mingolo, Oscar E. Martínez, Jorge J. Rocca, and Carmen S. Menoni
Opt. Express 27(4) 5729-5744 (2019)

Device for real-time monitoring of oil-in-water and suspended solids based on thermal lens spectrometry and light scattering

Axel M. Lacapmesure, Oscar E. Martínez, and Darío Kunik
Appl. Opt. 59(13) D138-D147 (2020)

Absorptance behavior of optical coatings for high-average-power laser applications

Robert Chow, John R. Taylor, and Zhou Ling Wu
Appl. Opt. 39(4) 650-658 (2000)

Characterization by guided wave of instabilities of optical coatings submitted to high-power flux: thermal and third-order nonlinear properties of dielectric thin films

François Flory, Hervé Rigneault, Nopparat Maythaveekulchai, and Frédéric Zamkotsian
Appl. Opt. 32(28) 5628-5639 (1993)

Absorption and thermal conductivity of oxide thin films measured by photothermal displacement and reflectance methods

Z. L. Wu, M. Reichling, X.-Q. Hu, K. Balasubramanian, and K. H. Guenther
Appl. Opt. 32(28) 5660-5665 (1993)