Abstract

A new, to the best of our knowledge, method based on the linear active disturbance rejection control (LADRC) algorithm is proposed to design and build a vertical vibration isolator below ${0.1}\;{\rm Hz}$ for cold-atom interferometry. This system combines the control system that is used to process and to reduce feedback vibrations measured by a seismometer and a voice coil that is used to cancel the motion of a commercial passive vibration isolation platform. When the feedback is on, the vertical vibration is reduced by an additional factor of up to 1000 from 0.1 to ${5}\;{\rm Hz}$, while the system has a steady oscillation with a natural period of 66 s. The experimental results show that the LADRC is an effective control algorithm for this application and performs better than the classic lag compensation filters in our case. In addition, there are fewer parameters to adjust in this method, and we only need to tune the feedback gain of the system state error for its application.

© 2020 Optical Society of America

Full Article  |  PDF Article
More Like This
Phase-generated-carrier-modulated laser interferometer for measurement of ground vibration on an absolute gravimeter

Zhenyu Xiong, Guo Wei, Xudong Yu, Xingwu Long, and Youguang Guo
Appl. Opt. 59(2) 285-294 (2020)

Fiber optic interferometric seismometer with phase feedback control

Tianying Chang, Zhongmin Wang, Yue Yang, Yaolu Zhang, Zhifeng Zheng, Liyao Cheng, and Hong-Liang Cui
Opt. Express 28(5) 6102-6122 (2020)

Quantum hybrid optomechanical inertial sensing

Logan Richardson, Adam Hines, Andrew Schaffer, Brian P. Anderson, and Felipe Guzman
Appl. Opt. 59(22) G160-G166 (2020)

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (7)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Tables (1)

You do not have subscription access to this journal. Article tables are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (5)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Metrics