Abstract
Majority carrier depletion has been proposed as a method to suppress the dark current originating from quasi-neutral regions in HgCdTe infrared focal plane array detectors. However, a very low doping level is usually required for the absorber layer, a task quite difficult to achieve in realizations. In order to address this point, we performed combined electromagnetic and electric simulations of a planar $ 5 \times 5 $ pixel miniarray with 5 µm wide square pixels, assessing the effect of the absorber thickness, its doping level in the interval $ {N_D}{ = [10^{14}}{,10^{15}}] \;{{\rm cm}^{ - 3}} $, and temperature in the interval 140 K–230 K, both in the dark and under illumination. Looking for a trade-off, we found that the path towards high-temperature operation has quite stringent requirements on the residual doping, whereas a reduction of the absorber thickness helps only moderately to reduce the dark current. Under illumination, interpixel cross talk is only slightly cut down by a decrease of temperature or absorber doping in the considered intervals, whereas it gets more effectively reduced by thinning the absorber.
© 2020 Optical Society of America
Full Article | PDF ArticleMore Like This
Marco Vallone, Michele Goano, Alberto Tibaldi, Stefan Hanna, Detlef Eich, Alexander Sieck, Heinrich Figgemeier, Giovanni Ghione, and Francesco Bertazzi
Appl. Opt. 59(19) 5656-5663 (2020)
Antoni Rogalski, Małgorzata Kopytko, and Piotr Martyniuk
Appl. Opt. 57(18) D11-D19 (2018)
Esrom Kifle, Pavel Loiko, Lauren Guillemot, Jean-Louis Doualan, Florent Starecki, Alain Braud, Thierry Georges, Julien Rouvillain, and Patrice Camy
Appl. Opt. 59(25) 7530-7539 (2020)